Bienvenue sur le forum de la ZiGate !
Ici, nous échangeons sur les produits ZiGate (matériellement) et les firmware.
Pour que vous puissiez gagner du temps, je vous conseille de visiter, dans un premier temps, les forums et documentations des plugins et box domotique que vous avez choisi :
Jeedom :
Forum : https://community.jeedom.com/
Plugin ZiGate : https://github.com/Jeedom-Zigate/jeedom-plugin-zigate
Plugin Abeille : https://github.com/KiwiHC16/Abeille + http://kiwihc16.free.fr/
Domoticz :
Forum Francophone: https://easydomoticz.com/forum/viewforum.php?f=28
Forum Anglophone: https://www.domoticz.com/forum/viewforum.php?f=68
Développeur: @pipiche38 disponible sur keybase.io en chat
EEdomus :
Forum : https://forum.eedomus.com/
Home-assistant :
Plugin : https://github.com/doudz/homeassistant-zigate
Zigpy : https://www.home-assistant.io/integrations/zha/
Pizigate+ v2 not working in Domoticz and not being able to upgrade
Hi,
I purchased a Pizigate+ v2 last week and I am trying to get it working properly in Domoticz using the Zigbee Domoticz plugin. I have the following setup:
Raspberry 4+ running Raspbian 11 (Bullseye) with a Pizigate+ V2.
Domoticz version 2023.1 (build 15099) and Zigbee for Domoticz plugin version 6.3.0.10.
I can run the PiZigate_test tool and get the following output:
RPI Model searching ...
All it's OK
Verifying /boot/cmdline.txt ...
+ /boot/cmdline.txt seems to be OK
Searching /dev/ttyS0...
+ Port : /dev/ttyS0 is not used
Verif GPIOs ...
+ GPIO 0 (RESET) --> OK
+ GPIO 2 (FLASH) --> OK
Config GPIOs ...
+ GPIO 0 (RESET) --> OK
+ GPIO 2 (FLASH) --> OK
Opening : /dev/ttyS0 ...
+ /dev/ttyS0 opened --> OK
+ Packet 01 02 10 10 02 10 02 10 10 03 sent --> OK
+ Packet received --> OK
size : 105
01 03 02 00 02 03 00 00 03
01 80 24 00 0d 83 01 00 00 00 15 8d 00 09 52 02 e1 0b 00 03
01 80 06 00 02 85 01 00 03
01 80 01 00 22 ce 06 41 50 50 3a 20 4e 4f 54 20 65 6e 74 65 72 69 6e 67 20 41 50 50 5f 76 4e 63 69 53 74 61 72 74 28 29 03
When i try to flash a new version of firmware on the Pizigate (after setting the right GPIO commands) i get following output:
lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq NXP DK6 Device Programmer (Build 2282) qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x/dev/serial0 x
x x
xError opening connection: Read error x
x x
xqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqx
Also, when looking at the Zigbee for Domoticz logs i see following:
Zigate-plugin: [ 70] I have hard time to get Coordinator Version. Mostlikly there is a communication issue
Question is what is going wrong? The Pizigate seems to react to the PiZigate_test tool but not to the programmer and not by the Domoticz plugin.
Thanks for the help!
Regards,
Mark
Hi,
the test procedure show that you use an other tool in same time with the PiZiGate. I think you did the test with domoticz on.
If you want to do the flash, you have to desactive domoticz to avoid conflict access. You have to do settings on GPIOs before each flash command.
The same things if you want to use PiZiGate on domoticz. You have to be sure that none of other tool use PiZiGate.
Fred