Bienvenue sur le forum de la ZiGate !

Ici, nous échangeons sur les produits ZiGate (matériellement) et les firmware.

Pour que vous puissiez gagner du temps, je vous conseille de visiter, dans un premier temps, les forums et documentations des plugins et box domotique que vous avez choisi :

Jeedom :

Forum : https://community.jeedom.com/
Plugin ZiGate : https://github.com/Jeedom-Zigate/jeedom-plugin-zigate
Plugin Abeille : https://github.com/KiwiHC16/Abeille + http://kiwihc16.free.fr/

Domoticz :

Forum Francophonehttps://easydomoticz.com/forum/viewforum.php?f=28
Forum Anglophonehttps://www.domoticz.com/forum/viewforum.php?f=68
Développeur: @pipiche38 disponible sur keybase.io en chat

EEdomus :

Forum : https://forum.eedomus.com/

Home-assistant :

Plugin : https://github.com/doudz/homeassistant-zigate
Zigpy : https://www.home-assistant.io/integrations/zha/

Fil d’Ariane du forum – Vous êtes ici :Forum de la ZiGatePiZiGate: HardwarePizigate Ko
Veuillez pour créer des messages et des sujets de discussion.

Pizigate Ko

Bonsoir a tous,

 

voila que j'utilise cette petite mervielle depuis presque 2 ans sans acros, et du jours au lendemain...

bim plus rien

On commence par la config

Raspberry PI4b

Debian bulleyes

Pizigate 1

.

 

niveau test j'ai ca

RPI Model searching ...
All it's OK
Verifying /boot/cmdline.txt ...
+ /boot/cmdline.txt seems to be OK
Searching /dev/serial0...
sh: 1: lsof: not found
+ Port : /dev/serial0 is not used
Verif GPIOs ...
+ GPIO 0 (RESET) --> OK
+ GPIO 2 (FLASH) --> OK
Config GPIOs ...
+ GPIO 0 (RESET) --> OK
+ GPIO 2 (FLASH) --> OK
Opening : /dev/serial0 ...
+ /dev/serial0 opened --> OK
+ Packet 01 02 10 10 02 10 02 10 10 03 sent --> OK
- No packet received - size sent : 11 - error : 11

gpio readll +-----+-----+---------+------+---+---Pi 4B--+---+------+---------+-----+-----+
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
| | | 3.3v | | | 1 || 2 | | | 5v | | |
| 2 | 8 | SDA.1 | IN | 1 | 3 || 4 | | | 5v | | |
| 3 | 9 | SCL.1 | IN | 1 | 5 || 6 | | | 0v | | |
| 4 | 7 | GPIO. 7 | IN | 1 | 7 || 8 | 1 | ALT0 | TxD | 15 | 14 |
| | | 0v | | | 9 || 10 | 1 | ALT0 | RxD | 16 | 15 |
| 17 | 0 | GPIO. 0 | OUT | 1 | 11 || 12 | 0 | IN | GPIO. 1 | 1 | 18 |
| 27 | 2 | GPIO. 2 | OUT | 1 | 13 || 14 | | | 0v | | |
| 22 | 3 | GPIO. 3 | IN | 0 | 15 || 16 | 0 | IN | GPIO. 4 | 4 | 23 |
| | | 3.3v | | | 17 || 18 | 0 | IN | GPIO. 5 | 5 | 24 |
| 10 | 12 | MOSI | IN | 0 | 19 || 20 | | | 0v | | |
| 9 | 13 | MISO | IN | 0 | 21 || 22 | 0 | IN | GPIO. 6 | 6 | 25 |
| 11 | 14 | SCLK | IN | 0 | 23 || 24 | 1 | IN | CE0 | 10 | 8 |
| | | 0v | | | 25 || 26 | 1 | IN | CE1 | 11 | 7 |
| 0 | 30 | SDA.0 | IN | 1 | 27 || 28 | 1 | IN | SCL.0 | 31 | 1 |
| 5 | 21 | GPIO.21 | IN | 1 | 29 || 30 | | | 0v | | |
| 6 | 22 | GPIO.22 | IN | 1 | 31 || 32 | 0 | IN | GPIO.26 | 26 | 12 |
| 13 | 23 | GPIO.23 | IN | 0 | 33 || 34 | | | 0v | | |
| 19 | 24 | GPIO.24 | IN | 0 | 35 || 36 | 0 | IN | GPIO.27 | 27 | 16 |
| 26 | 25 | GPIO.25 | IN | 0 | 37 || 38 | 0 | IN | GPIO.28 | 28 | 20 |
| | | 0v | | | 39 || 40 | 0 | IN | GPIO.29 | 29 | 21 |
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
+-----+-----+---------+------+---+---Pi 4B--+---+------+---------

gpio -v

gpio version: 2.70
Copyright (c) 2012-2018 Gordon Henderson
This is free software with ABSOLUTELY NO WARRANTY.
For details type: gpio -warranty

Raspberry Pi Details:
Type: Pi 4B, Revision: 02, Memory: 4096MB, Maker: Sony
* Device tree is enabled.
*--> Raspberry Pi 4 Model B Rev 1.2
* This Raspberry Pi supports user-level GPIO access.

 

la led est bien brillante donc en théorie fonctionnelle , pourtant je n'ai plus aucun contrôle sur mes device.

 

Quelqu'un aurais une idée ?

apres essai de flash j'ai ca

 

./JennicModuleProgrammer -V 6 -e -P 115200 -f ZiGate_v3.21-legacy.bin -s /dev/ttyAMA0 JennicModuleProgrammer Version: 0.7(r56124)
Setting baudrate: 115200
Detected Chip: Unknown
MAC Address: 00:15:8D:00:02:BC:FD:9D
Opened firmware file size 208568
Module uses Bootloader v2 Header
Erasing: 100%
Writing Program to Flash
Writing: 17%
Failed to write at address 0x00008b80

Translate »