Bienvenue sur le forum de la ZiGate !

Ici, nous échangeons sur les produits ZiGate (matériellement) et les firmware.

Pour que vous puissiez gagner du temps, je vous conseille de visiter, dans un premier temps, les forums et documentations des plugins et box domotique que vous avez choisi :

Jeedom :

Forum : https://community.jeedom.com/
Plugin ZiGate : https://github.com/Jeedom-Zigate/jeedom-plugin-zigate
Plugin Abeille : https://github.com/KiwiHC16/Abeille + http://kiwihc16.free.fr/

Domoticz :

Forum Francophonehttps://easydomoticz.com/forum/viewforum.php?f=28
Forum Anglophonehttps://www.domoticz.com/forum/viewforum.php?f=68
Développeur: @pipiche38 disponible sur keybase.io en chat

EEdomus :

Forum : https://forum.eedomus.com/

Home-assistant :

Plugin : https://github.com/doudz/homeassistant-zigate
Zigpy : https://www.home-assistant.io/integrations/zha/

Fil d’Ariane du forum – Vous êtes ici :Forum de la ZiGatePiZiGate: Questions diversesMise à jour Pizigate
Veuillez pour créer des messages et des sujets de discussion.

Mise à jour Pizigate

Page 1 of 2Suivant

Bonjour

J'essai de mettre à jour ma pizigate en 3.1a pour associer un siren heiman.

J'applique la procedure:

Lorsque je fais make  de jennic programer, j'ai ce message:

cc -I. -Wall -O2 -I../Source/ -DDBG_ENABLE -DVERSION="\"56124\"" -c ../Source/uart.c
Assembler messages:
Fatal error: can't create uart.o: Permission denied
Makefile:56: recipe for target 'uart.o' failed
make: *** [uart.o] Error 1

 

Est ce quelqu’un sait pourquoi et pourrai m'aider?

Merci

Bonjour,

Rajoutez sudo avant la commande make

$ sudo make

Fred

Merci.

J'ai pu avancé maintenant j'ai erreur setting baudrate.

Ci-joint les manips que j'ai faite.

PS: je n'ai jamais vue de lumière bleue mais tous mes capteurs fonctionne dans jeedom.

 

pi@raspberrypi:~/JennicModuleProgrammer/Build $ gpio readall
+-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
| | | 3.3v | | | 1 || 2 | | | 5v | | |
| 2 | 8 | SDA.1 | IN | 1 | 3 || 4 | | | 5v | | |
| 3 | 9 | SCL.1 | IN | 1 | 5 || 6 | | | 0v | | |
| 4 | 7 | GPIO. 7 | IN | 1 | 7 || 8 | 1 | ALT0 | TxD | 15 | 14 |
| | | 0v | | | 9 || 10 | 1 | ALT0 | RxD | 16 | 15 |
| 17 | 0 | GPIO. 0 | OUT | 1 | 11 || 12 | 0 | IN | GPIO. 1 | 1 | 18 |
| 27 | 2 | GPIO. 2 | OUT | 1 | 13 || 14 | | | 0v | | |
| 22 | 3 | GPIO. 3 | IN | 0 | 15 || 16 | 0 | IN | GPIO. 4 | 4 | 23 |
| | | 3.3v | | | 17 || 18 | 0 | IN | GPIO. 5 | 5 | 24 |
| 10 | 12 | MOSI | IN | 0 | 19 || 20 | | | 0v | | |
| 9 | 13 | MISO | IN | 0 | 21 || 22 | 0 | IN | GPIO. 6 | 6 | 25 |
| 11 | 14 | SCLK | IN | 0 | 23 || 24 | 1 | IN | CE0 | 10 | 8 |
| | | 0v | | | 25 || 26 | 1 | IN | CE1 | 11 | 7 |
| 0 | 30 | SDA.0 | IN | 1 | 27 || 28 | 1 | IN | SCL.0 | 31 | 1 |
| 5 | 21 | GPIO.21 | IN | 1 | 29 || 30 | | | 0v | | |
| 6 | 22 | GPIO.22 | IN | 1 | 31 || 32 | 0 | IN | GPIO.26 | 26 | 12 |
| 13 | 23 | GPIO.23 | IN | 1 | 33 || 34 | | | 0v | | |
| 19 | 24 | GPIO.24 | IN | 1 | 35 || 36 | 0 | IN | GPIO.27 | 27 | 16 |
| 26 | 25 | GPIO.25 | IN | 1 | 37 || 38 | 1 | OUT | GPIO.28 | 28 | 20 |
| | | 0v | | | 39 || 40 | 1 | IN | GPIO.29 | 29 | 21 |
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
+-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
pi@raspberrypi:~/JennicModuleProgrammer/Build $ ./JennicModuleProgrammer -V 6 -P 115200 -f /home/pi/ZiGate_v3.1a.bin -s /dev/ttyAMA0
JennicModuleProgrammer Version: 0.6 (r56124)
Setting baudrate: 115200
Error setting baudrate
pi@raspberrypi:~/JennicModuleProgrammer/Build $ gpio mode 0 out
pi@raspberrypi:~/JennicModuleProgrammer/Build $ gpio mode 2 out pi@raspberrypi:~/JennicModuleProgrammer/Build $ gpio write 2 0 pi@raspberrypi:~/JennicModuleProgrammer/Build $ gpio write 0 0 pi@raspberrypi:~/JennicModuleProgrammer/Build $ gpio write 0 1 pi@raspberrypi:~/JennicModuleProgrammer/Build $ gpio readall +-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
| | | 3.3v | | | 1 || 2 | | | 5v | | |
| 2 | 8 | SDA.1 | IN | 1 | 3 || 4 | | | 5v | | |
| 3 | 9 | SCL.1 | IN | 1 | 5 || 6 | | | 0v | | |
| 4 | 7 | GPIO. 7 | IN | 1 | 7 || 8 | 1 | ALT0 | TxD | 15 | 14 |
| | | 0v | | | 9 || 10 | 1 | ALT0 | RxD | 16 | 15 |
| 17 | 0 | GPIO. 0 | OUT | 1 | 11 || 12 | 0 | IN | GPIO. 1 | 1 | 18 |
| 27 | 2 | GPIO. 2 | OUT | 1 | 13 || 14 | | | 0v | | |
| 22 | 3 | GPIO. 3 | IN | 0 | 15 || 16 | 0 | IN | GPIO. 4 | 4 | 23 |
| | | 3.3v | | | 17 || 18 | 0 | IN | GPIO. 5 | 5 | 24 |
| 10 | 12 | MOSI | IN | 0 | 19 || 20 | | | 0v | | |
| 9 | 13 | MISO | IN | 0 | 21 || 22 | 0 | IN | GPIO. 6 | 6 | 25 |
| 11 | 14 | SCLK | IN | 0 | 23 || 24 | 1 | IN | CE0 | 10 | 8 |
| | | 0v | | | 25 || 26 | 1 | IN | CE1 | 11 | 7 |
| 0 | 30 | SDA.0 | IN | 1 | 27 || 28 | 1 | IN | SCL.0 | 31 | 1 |
| 5 | 21 | GPIO.21 | IN | 1 | 29 || 30 | | | 0v | | |
| 6 | 22 | GPIO.22 | IN | 1 | 31 || 32 | 0 | IN | GPIO.26 | 26 | 12 |
| 13 | 23 | GPIO.23 | IN | 1 | 33 || 34 | | | 0v | | |
| 19 | 24 | GPIO.24 | IN | 1 | 35 || 36 | 0 | IN | GPIO.27 | 27 | 16 |
| 26 | 25 | GPIO.25 | IN | 1 | 37 || 38 | 1 | OUT | GPIO.28 | 28 | 20 |
| | | 0v | | | 39 || 40 | 1 | IN | GPIO.29 | 29 | 21 |
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
+-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
pi@raspberrypi:~/JennicModuleProgrammer/Build $ ./JennicModuleProgrammer -V 6 -P 115200 -f /home/pi/ZiGate_v3.1a.bin -s /dev/ttyAMA0
JennicModuleProgrammer Version: 0.6 (r56124)
Setting baudrate: 115200
Error setting baudrate
pi@raspberrypi:~/JennicModuleProgrammer/Build $ ps-ef
-bash: ps-ef: command not found
pi@raspberrypi:~/JennicModuleProgrammer/Build $ ps -ef
UID PID PPID C STIME TTY TIME CMD
root 1 0 0 17:29 ? 00:00:02 /sbin/init
root 2 0 0 17:29 ? 00:00:00 [kthreadd]
root 4 2 0 17:29 ? 00:00:00 [kworker/0:0H]
root 5 2 0 17:29 ? 00:00:00 [kworker/u8:0]
root 6 2 0 17:29 ? 00:00:00 [mm_percpu_wq]
root 7 2 0 17:29 ? 00:00:00 [ksoftirqd/0]
root 8 2 0 17:29 ? 00:00:00 [rcu_sched]
root 9 2 0 17:29 ? 00:00:00 [rcu_bh]
root 10 2 0 17:29 ? 00:00:00 [migration/0]
root 11 2 0 17:29 ? 00:00:00 [cpuhp/0]
root 12 2 0 17:29 ? 00:00:00 [cpuhp/1]
root 13 2 0 17:29 ? 00:00:00 [migration/1]
root 14 2 0 17:29 ? 00:00:00 [ksoftirqd/1]
root 16 2 0 17:29 ? 00:00:00 [kworker/1:0H]
root 17 2 0 17:29 ? 00:00:00 [cpuhp/2]
root 18 2 0 17:29 ? 00:00:00 [migration/2]
root 19 2 0 17:29 ? 00:00:00 [ksoftirqd/2]
root 20 2 0 17:29 ? 00:00:00 [kworker/2:0]
root 21 2 0 17:29 ? 00:00:00 [kworker/2:0H]
root 22 2 0 17:29 ? 00:00:00 [cpuhp/3]
root 23 2 0 17:29 ? 00:00:00 [migration/3]
root 24 2 0 17:29 ? 00:00:00 [ksoftirqd/3]
root 25 2 0 17:29 ? 00:00:00 [kworker/3:0]
root 26 2 0 17:29 ? 00:00:00 [kworker/3:0H]
root 27 2 0 17:29 ? 00:00:00 [kdevtmpfs]
root 28 2 0 17:29 ? 00:00:00 [netns]
root 29 2 0 17:29 ? 00:00:00 [kworker/0:1]
root 33 2 0 17:29 ? 00:00:00 [khungtaskd]
root 34 2 0 17:29 ? 00:00:00 [oom_reaper]
root 35 2 0 17:29 ? 00:00:00 [writeback]
root 36 2 0 17:29 ? 00:00:00 [kcompactd0]
root 37 2 0 17:29 ? 00:00:00 [crypto]
root 38 2 0 17:29 ? 00:00:00 [kblockd]
root 39 2 0 17:29 ? 00:00:00 [watchdogd]
root 40 2 0 17:29 ? 00:00:00 [rpciod]
root 41 2 0 17:29 ? 00:00:00 [xprtiod]
root 42 2 0 17:29 ? 00:00:00 [kworker/u8:1]
root 44 2 0 17:29 ? 00:00:00 [kswapd0]
root 45 2 0 17:29 ? 00:00:00 [nfsiod]
root 55 2 0 17:29 ? 00:00:00 [kthrotld]
root 56 2 0 17:29 ? 00:00:00 [iscsi_eh]
root 57 2 0 17:29 ? 00:00:00 [dwc_otg]
root 58 2 0 17:29 ? 00:00:00 [DWC Notificatio]
root 59 2 0 17:29 ? 00:00:00 [vchiq-slot/0]
root 60 2 0 17:29 ? 00:00:00 [vchiq-recy/0]
root 61 2 0 17:29 ? 00:00:00 [vchiq-sync/0]
root 62 2 0 17:29 ? 00:00:00 [vchiq-keep/0]
root 63 2 0 17:29 ? 00:00:00 [SMIO]
root 65 2 0 17:29 ? 00:00:00 [irq/92-mmc1]
root 66 2 0 17:29 ? 00:00:00 [kworker/0:3]
root 68 2 0 17:29 ? 00:00:00 [mmcqd/0]
root 69 2 0 17:29 ? 00:00:00 [jbd2/mmcblk0p2-]
root 70 2 0 17:29 ? 00:00:00 [ext4-rsv-conver]
root 71 2 0 17:29 ? 00:00:00 [ipv6_addrconf]
root 88 1 0 17:29 ? 00:00:01 /lib/systemd/systemd-journald
root 105 2 0 17:29 ? 00:00:00 [kworker/3:2]
root 111 2 0 17:29 ? 00:00:00 [kworker/2:2]
root 126 1 0 17:29 ? 00:00:00 /lib/systemd/systemd-udevd
root 133 2 0 17:29 ? 00:00:00 [kworker/1:2]
root 144 2 0 17:29 ? 00:00:00 [kworker/u8:3]
root 232 2 0 17:29 ? 00:00:00 [cfg80211]
root 237 2 0 17:29 ? 00:00:00 [brcmf_wq/mmc1:0]
root 239 2 0 17:29 ? 00:00:00 [brcmf_wdog/mmc1]
root 240 2 0 17:29 ? 00:00:00 [kworker/1:3]
root 294 1 0 17:29 ? 00:00:00 /usr/sbin/rsyslogd -n
root 296 1 0 17:29 ? 00:00:00 /usr/sbin/cron -f
daemon 297 1 0 17:29 ? 00:00:00 /usr/sbin/atd -f
message+ 307 1 0 17:29 ? 00:00:00 /usr/bin/dbus-daemon --system --
root 317 1 0 17:29 ? 00:00:00 /usr/sbin/rngd -r /dev/hwrng
root 347 1 0 17:29 ? 00:00:00 /sbin/wpa_supplicant -u -s -O /r
root 348 1 0 17:29 ? 00:00:00 /lib/systemd/systemd-logind
nobody 352 1 0 17:29 ? 00:00:00 /usr/sbin/thd --triggers /etc/tr
avahi 357 1 0 17:29 ? 00:00:00 avahi-daemon: running [raspberry
avahi 384 357 0 17:29 ? 00:00:00 avahi-daemon: chroot helper
root 417 1 0 17:29 ? 00:00:00 wpa_supplicant -B -c/etc/wpa_sup
root 452 2 0 17:29 ? 00:00:00 [kworker/0:1H]
root 453 2 0 17:29 ? 00:00:00 [kworker/2:1H]
root 512 1 0 17:29 ? 00:00:00 /sbin/dhcpcd -q -w
mosquit+ 516 1 0 17:29 ? 00:00:00 /usr/sbin/mosquitto -c /etc/mosq
root 552 1 0 17:29 tty1 00:00:00 /sbin/agetty --noclear tty1 linu
ntp 559 1 0 17:29 ? 00:00:00 /usr/sbin/ntpd -p /var/run/ntpd.
root 576 1 0 17:29 ? 00:00:00 /usr/sbin/sshd -D
mysql 691 1 6 17:29 ? 00:00:31 /usr/sbin/mysqld
root 692 1 0 17:29 ? 00:00:00 /usr/sbin/apache2 -k start
root 724 1 0 17:29 ? 00:00:04 /usr/bin/python3 /usr/bin/fail2b
www-data 762 692 0 17:29 ? 00:00:01 /usr/sbin/apache2 -k start
www-data 763 692 0 17:29 ? 00:00:02 /usr/sbin/apache2 -k start
www-data 764 692 0 17:29 ? 00:00:02 /usr/sbin/apache2 -k start
www-data 765 692 0 17:29 ? 00:00:01 /usr/sbin/apache2 -k start
www-data 766 692 0 17:29 ? 00:00:01 /usr/sbin/apache2 -k start
www-data 816 692 0 17:29 ? 00:00:03 /usr/sbin/apache2 -k start
root 817 2 0 17:29 ? 00:00:00 [dio/mmcblk0p2]
Debian-+ 1183 1 0 17:29 ? 00:00:00 /usr/sbin/exim4 -bd -q30m
www-data 1265 692 0 17:29 ? 00:00:01 /usr/sbin/apache2 -k start
root 1698 576 0 17:29 ? 00:00:00 sshd: pi [priv]
www-data 1716 1 0 17:29 ? 00:00:00 php /var/www/html/core/class/../
pi 1730 1 0 17:29 ? 00:00:00 /lib/systemd/systemd --user
pi 1733 1730 0 17:29 ? 00:00:00 (sd-pam)
pi 1740 1698 0 17:29 ? 00:00:00 sshd: pi@notty
pi 1742 1740 0 17:29 ? 00:00:00 /usr/lib/openssh/sftp-server
root 1751 576 0 17:29 ? 00:00:00 sshd: pi [priv]
pi 1761 1751 0 17:29 ? 00:00:00 sshd: pi@pts/0
pi 1764 1761 0 17:29 pts/0 00:00:01 -bash
root 1781 2 0 17:29 ? 00:00:00 [kworker/3:1H]
www-data 2367 1 2 17:30 ? 00:00:12 /usr/bin/python /var/www/html/pl
www-data 2379 692 0 17:30 ? 00:00:01 /usr/sbin/apache2 -k start
www-data 2394 1 0 17:30 ? 00:00:00 /usr/bin/python /var/www/html/pl
www-data 2412 692 0 17:30 ? 00:00:01 /usr/sbin/apache2 -k start
www-data 2416 692 0 17:30 ? 00:00:01 /usr/sbin/apache2 -k start
www-data 2417 692 0 17:30 ? 00:00:01 /usr/sbin/apache2 -k start
www-data 2478 1 0 17:30 ? 00:00:00 /usr/bin/python /var/www/html/pl
www-data 2524 1 4 17:30 ? 00:00:19 /usr/bin/python /var/www/html/pl
root 2772 2 0 17:30 ? 00:00:00 [kworker/1:1H]
root 8907 2 0 17:34 ? 00:00:00 [kworker/0:0]
root 8909 2 0 17:34 ? 00:00:00 [kworker/0:2]
root 11671 2 0 17:36 ? 00:00:00 [kworker/u8:2]
root 12646 2 0 17:36 ? 00:00:00 [kworker/2:1]
root 13844 2 0 17:37 ? 00:00:00 [kworker/3:1]
www-data 15178 1 8 17:38 ? 00:00:00 php /var/www/html/core/class/../
www-data 15383 15178 0 17:38 ? 00:00:00 sh -c sudo ping -n -c 1 -t 255 1
root 15384 15383 0 17:38 ? 00:00:00 sudo ping -n -c 1 -t 255 192.168
root 15388 15384 0 17:38 ? 00:00:00 ping -n -c 1 -t 255 192.168.1.11
pi 15437 1764 0 17:38 pts/0 00:00:00 ps -ef
pi@raspberrypi:~/JennicModuleProgrammer/Build $

bonjour,

Avant chaque lancement de mise à jour il faut lancer les commandes suivantes :

$ gpio mode 0 out
$ gpio mode 2 out
$ gpio write 2 0 
$ gpio write 0 0
$ gpio write 0 1

Fred

Merci mais j'ai réessayé et c'est pareil, j'ai bien éteint le démon du plugin abeille avant l'essai.

pi@raspberrypi:~ $ gpio mode 0 out
pi@raspberrypi:~ $ gpio mode 2 out
pi@raspberrypi:~ $ gpio write 2 0
pi@raspberrypi:~ $ gpio write 0 0
pi@raspberrypi:~ $ gpio write 0 1
pi@raspberrypi:~ $ cd JennicModuleProgrammer/
pi@raspberrypi:~/JennicModuleProgrammer $ cd Build/
pi@raspberrypi:~/JennicModuleProgrammer/Build $ ./JennicModuleProgrammer -V 6 -P 115200 -f /home/pi/ZiGate_v3.1a.bin -s /dev/ttyAMA0 JennicModuleProgrammer Version: 0.6 (r56124)
Setting baudrate: 115200
Error setting baudrate
pi@raspberrypi:~/JennicModuleProgrammer/Build $ ^C
pi@raspberrypi:~/JennicModuleProgrammer/Build $

Bonjour,

vous avez quoi comme raspberry ?

pouvez vous me donner le résultat de la commande suivante :

$ ls -la /dev/s*

Fred

C'est un RPY PI 3.

Ci'dessous la commande demandée.

lrwxrwxrwx 1 root root 7 Dec 16 16:55 /dev/serial0 -> ttyAMA0
lrwxrwxrwx 1 root root 5 Dec 16 16:55 /dev/serial1 -> ttyS0
lrwxrwxrwx 1 root root 15 Nov 3 2016 /dev/stderr -> /proc/self/fd/2
lrwxrwxrwx 1 root root 15 Nov 3 2016 /dev/stdin -> /proc/self/fd/0
lrwxrwxrwx 1 root root 15 Nov 3 2016 /dev/stdout -> /proc/self/fd/1

/dev/serial:
total 0
drwxr-xr-x 4 root root 80 Dec 16 16:55 .
drwxr-xr-x 15 root root 3380 Dec 16 16:55 ..
drwxr-xr-x 2 root root 60 Dec 16 16:55 by-id
drwxr-xr-x 2 root root 60 Dec 16 16:55 by-path

/dev/shm:
total 0
drwxrwxrwt 2 root root 40 Nov 3 2016 .
drwxr-xr-x 15 root root 3380 Dec 16 16:55 ..

/dev/snd:
total 0
drwxr-xr-x 3 root root 160 Dec 16 16:55 .
drwxr-xr-x 15 root root 3380 Dec 16 16:55 ..
drwxr-xr-x 2 root root 60 Dec 16 16:55 by-path
crw-rw---- 1 root audio 116, 0 Dec 16 16:55 controlC0
crw-rw---- 1 root audio 116, 16 Dec 16 16:55 pcmC0D0p
crw-rw---- 1 root audio 116, 17 Dec 16 16:55 pcmC0D1p
crw-rw---- 1 root audio 116, 1 Dec 16 16:55 seq
crw-rw---- 1 root audio 116, 33 Dec 16 16:55 timer

Ok,

ce qui est bizarre, c'est que le gpio 0 reste à 1.

pouvez-vous refaire (pour être sur):

$ gpio mode 0 out
$ gpio mode 2 out
$ gpio write 2 0 
$ gpio write 0 0
$ gpio write 0 1
$ gpio readall

Fred

Merci de votre aide, voici:

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Tue Dec 17 17:48:21 2019 from 192.168.1.130
pi@raspberrypi:~ $ gpio mode 0 out
pi@raspberrypi:~ $ gpio mode 2 out
pi@raspberrypi:~ $ gpio write 2 0
pi@raspberrypi:~ $ gpio write 0 0
pi@raspberrypi:~ $ gpio write 0 1
pi@raspberrypi:~ $ gpio readall
+-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
| | | 3.3v | | | 1 || 2 | | | 5v | | |
| 2 | 8 | SDA.1 | IN | 1 | 3 || 4 | | | 5v | | |
| 3 | 9 | SCL.1 | IN | 1 | 5 || 6 | | | 0v | | |
| 4 | 7 | GPIO. 7 | IN | 1 | 7 || 8 | 1 | ALT0 | TxD | 15 | 14 |
| | | 0v | | | 9 || 10 | 1 | ALT0 | RxD | 16 | 15 |
| 17 | 0 | GPIO. 0 | OUT | 1 | 11 || 12 | 0 | IN | GPIO. 1 | 1 | 18 |
| 27 | 2 | GPIO. 2 | OUT | 1 | 13 || 14 | | | 0v | | |
| 22 | 3 | GPIO. 3 | IN | 0 | 15 || 16 | 0 | IN | GPIO. 4 | 4 | 23 |
| | | 3.3v | | | 17 || 18 | 0 | IN | GPIO. 5 | 5 | 24 |
| 10 | 12 | MOSI | IN | 0 | 19 || 20 | | | 0v | | |
| 9 | 13 | MISO | IN | 0 | 21 || 22 | 0 | IN | GPIO. 6 | 6 | 25 |
| 11 | 14 | SCLK | IN | 0 | 23 || 24 | 1 | IN | CE0 | 10 | 8 |
| | | 0v | | | 25 || 26 | 1 | IN | CE1 | 11 | 7 |
| 0 | 30 | SDA.0 | IN | 1 | 27 || 28 | 1 | IN | SCL.0 | 31 | 1 |
| 5 | 21 | GPIO.21 | IN | 1 | 29 || 30 | | | 0v | | |
| 6 | 22 | GPIO.22 | IN | 1 | 31 || 32 | 0 | IN | GPIO.26 | 26 | 12 |
| 13 | 23 | GPIO.23 | IN | 1 | 33 || 34 | | | 0v | | |
| 19 | 24 | GPIO.24 | IN | 1 | 35 || 36 | 0 | IN | GPIO.27 | 27 | 16 |
| 26 | 25 | GPIO.25 | IN | 1 | 37 || 38 | 1 | OUT | GPIO.28 | 28 | 20 |
| | | 0v | | | 39 || 40 | 1 | IN | GPIO.29 | 29 | 21 |
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
+-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
pi@raspberrypi:~ $

J'ai remarqué qu'il passe à 0 1s quand je fait programmer avec le plugin abeille.

Si ça peut aider.

Page 1 of 2Suivant
Translate »