Bienvenue sur le forum de la ZiGate !

Ici, nous échangeons sur les produits ZiGate (matériellement) et les firmware.

Pour que vous puissiez gagner du temps, je vous conseille de visiter, dans un premier temps, les forums et documentations des plugins et box domotique que vous avez choisi :

Jeedom :

Forum : https://community.jeedom.com/
Plugin ZiGate : https://github.com/Jeedom-Zigate/jeedom-plugin-zigate
Plugin Abeille : https://github.com/KiwiHC16/Abeille + http://kiwihc16.free.fr/

Domoticz :

Forum Francophone: https://easydomoticz.com/forum/viewforum.php?f=28
Forum Anglophone: https://www.domoticz.com/forum/viewforum.php?f=68
Développeur: @pipiche38 disponible sur keybase.io en chat

EEdomus :

Forum : https://forum.eedomus.com/

Home-assistant :

Plugin : https://github.com/doudz/homeassistant-zigate
Zigpy : https://www.home-assistant.io/integrations/zha/

Forum de la ZiGateMatériels compatibles: Ajout d'un matériel compatibleInter Xiaomi Mijia Smart

Veuillez pour créer des messages et des sujets de discussion.

Inter Xiaomi Mijia Smart

#1 · 19 septembre 2019, 11 h 06 min

Bonjour,

Je viens de faire l’acquisition du PiZigate, tout est installé et tourne. Par contre il m'est impossible de détecter correctement mon interrupteur Xiaomi Mijia.

J'ai lancé le mode "découverte" qui une fois a détecté mon inter, mais j'ai eu droit à des messages d'erreurs. J'ai donc supprimé le périphérique et depuis impossible de le détecter à nouveau!!

Je suis très perplexe sur la fiabilité du Pizigate.

Une idée pour résoudre mon pb? J'ai le même problème avec la prise Mijia

#2 · 20 septembre 2019, 9 h 24 min

Bonjour,

Vous utilisez quel box / plugin ? la version ?

Quels sont les messages d'erreurs ?

Fred

#3 · 20 septembre 2019, 13 h 40 min

bhen, j'ai un PIZigate, c'est uniquement sur un Raspberry, non?

J'ai la version 3b du Raspberry, j'ai fait tout le nécessaire indiqué sur votre site.

J'ai utilisé le gestionnaire de plugin jeedom pour installer votre plugin.

Aucun message d'erreur puisque rien n'est détecté!

Tout est au vert au niveau du paramétrage (Demon, port.....)

Merci de vote aide

#4 · 21 septembre 2019, 10 h 58 min

Bonjour,

Oui la Pizigate ne se branche que sur une Raspberry mais il existe 4 plugins/box différentes : Abeille/Jeedom - ZiGate/jeedom - domoticz et home-assistant.

Vous me dites que vous avez eu droit à des messages d'erreurs et maintenant que vous n'en avait pas.

Difficile pour moi de pouvoir vous aider sans avoir d'informations.

Apparemment, vous utilisez Jeedom mais quel plugin ? ZiGate ou Abeille (je rappelle que je ne suis pas le développeur de plugin)

Si vous mettez le plugin en mode debug, vous avez quoi dans les logs ?

Fred

#5 · 2 octobre 2019, 11 h 07 min

Bon, j'ai avancé, en relançant les dépendances et le daemon j'ai fini par retomber sur mes pieds.

Maintenant j'ai plus un pb qui peut potentiellement venir du plug in zigate/jeedom. En effet ma prise est bien identifiée mais la liste des commandes disponibles me semble light.

Je ne peut pas faire un simple ON/OFF. Comment ajouter les commandes manquantes?

Merci.

Ci-dessous quelques print écran

https://www.mycourriels.fr/nextcloud/index.php/s/cyWqYcdoJ8gfETx

https://www.mycourriels.fr/nextcloud/index.php/s/ZdHgDB6tctEx7BC

https://www.mycourriels.fr/nextcloud/index.php/s/G2BA9cQ5kHDTQiT

#6 · 2 octobre 2019, 18 h 17 min

Bonjour,

Je ne suis pas le développeur du plugin mais il me semble que le plugin ZiGate est basé sur une auto découverte des commandes. Pour que les commandes apparaissent, il faut solliciter votre appareil et cliquer sur "découvrir l'équipement"

Fred

#7 · 2 octobre 2019, 19 h 47 min

Citation de Laurent Habets le 2 octobre 2019, 19 h 47 min
j'ai une nouvelle fois supprime la prise pour faire une nouvelle inclusion voila le log;

[2019-10-02 19:29:01][ERROR][zigate](ZiGate-Listen) : OOPS connection lost, reconnect...
[2019-10-02 19:29:00][ERROR][zigate](ZiGate-Listen) : OOPS connection lost, reconnect...
[2019-10-02 19:29:11][ERROR][zigate](MainThread) : Failed to acquire Lock to save persistent file
[2019-10-02 19:29:06][ERROR][zigate](MainThread) : Failed to acquire Lock to save persistent file
[2019-10-02 19:30:11][INFO] : Lancement démon zigate : /usr/bin/python3 /var/www/html/plugins/zigate/core/class/../../resources/zigated/zigated.py --device /dev/ttyAMA0 --gpio 1 --loglevel debug --apikey tPgF5jPEiCQb5XSiV3MfIZlcdT8WBPFI --pid /tmp/jeedom/zigate/daemon.pid --socket /tmp/jeedom/zigate/daemon.sock --callback http://127.0.0.1:80/plugins/zigate/core/php/jeeZiGate.php --sharedata 0
[2019-10-02 19:30:12][INFO][root](MainThread) : Start zigated
[2019-10-02 19:30:12][INFO][root](MainThread) : Log level : debug
[2019-10-02 19:30:12][INFO][root](MainThread) : Socket : /tmp/jeedom/zigate/daemon.sock
[2019-10-02 19:30:12][INFO][root](MainThread) : PID file : /tmp/jeedom/zigate/daemon.pid
[2019-10-02 19:30:12][INFO][root](MainThread) : Apikey : tPgF5jPEiCQb5XSiV3MfIZlcdT8WBPFI
[2019-10-02 19:30:12][INFO][root](MainThread) : Device : /dev/ttyAMA0
[2019-10-02 19:30:12][INFO][root](MainThread) : Callback : http://127.0.0.1:80/plugins/zigate/core/php/jeeZiGate.php
[2019-10-02 19:30:12][INFO][root](MainThread) : Python version : 3.7.3 (default, Apr 3 2019, 05:39:12)
[GCC 8.2.0]
[2019-10-02 19:30:12][INFO][root](MainThread) : zigate version : 0.32.2
[2019-10-02 19:30:12][INFO][root](MainThread) : Plugin Abeille détecté, vérification de l'état
[2019-10-02 19:30:12][INFO][root](MainThread) : Ok, le plugin Abeille ne semble pas en fonctionnement.
[2019-10-02 19:30:12][DEBUG][root](MainThread) : Writing PID 1703 to /tmp/jeedom/zigate/daemon.pid
[2019-10-02 19:30:12][DEBUG][root](MainThread) : Send to test to jeedom
[2019-10-02 19:30:12][DEBUG][root](MainThread) : Send to jeedom : {'action': 'test'}
[2019-10-02 19:30:12][DEBUG] : Array ( [action] => test )
[2019-10-02 19:30:12][DEBUG][root](MainThread) : Jeedom reply : {'success': True}
[2019-10-02 19:30:12][INFO][root](MainThread) : Démarrage ZiGate /dev/ttyAMA0
[2019-10-02 19:30:13][INFO] : Démon zigate lancé
/usr/local/lib/python3.7/dist-packages/zigate/core.py:2177: RuntimeWarning: This channel is already in use, continuing anyway. Use GPIO.setwarnings(False) to disable warnings.
GPIO.setup(27, GPIO.OUT) # GPIO2
/usr/local/lib/python3.7/dist-packages/zigate/core.py:2184: RuntimeWarning: This channel is already in use, continuing anyway. Use GPIO.setwarnings(False) to disable warnings.
GPIO.setup(17, GPIO.IN, pull_up_down=GPIO.PUD_DOWN) # GPIO0
[2019-10-02 19:30:13][DEBUG][zigate](MainThread) : Try loading persistent file
[2019-10-02 19:30:13][DEBUG][zigate](MainThread) : Trying to load /var/www/html/plugins/zigate/core/class/../../resources/zigated/zigate.json
[2019-10-02 19:30:13][DEBUG][zigate](MainThread) : Load success
[2019-10-02 19:30:13][DEBUG][zigate](MainThread) : REQUEST : 0x0010
[2019-10-02 19:30:13][DEBUG][zigate](MainThread) : Msg to send b'0010000010'
[2019-10-02 19:30:13][DEBUG][zigate](MainThread) : Encoded Msg to send b'01021010021002101003'
[2019-10-02 19:30:13][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0010
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Listen) : Raw packet received, b'\x01\x80\x02\x10\x02\x10\x02\x15\x95\x02\x10\x02\x10\x02\x10\x10\x02\x10\x03\x01\x80\x10\x02\x10\x02\x15\x8f\x02\x10\x02\x13\x02\x13\x1a\x02\x10\x03'
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Event Loop) : Dispatch ZIGATE_PACKET_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Received response 0x8000: b'00000010'
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Event Loop) : Dispatch ZIGATE_PACKET_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : RESPONSE 0x8000 - Status response : status:0, sequence:0, packet_type:16, error:b'', lqi:0
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Received response 0x8010: b'0003031a'
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Dispatch ZIGATE_RESPONSE_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : STATUS code to command 0x0010:RESPONSE 0x8000 - Status response : status:0, sequence:0, packet_type:16, error:b'', lqi:0
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : RESPONSE 0x8010 - Version list : major:3, installer:31a, lqi:0, version:3.1a
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Waiting for message 0x8010
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Dispatch ZIGATE_RESPONSE_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Stop waiting, got message 0x8010
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : REQUEST : 0x0021 b'\x03\x18\xc8\x00'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Msg to send b'00210004f60318c800'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Encoded Msg to send b'0102102102100214f6021318c8021003'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0021
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Listen) : Raw packet received, b'\x01\x80\x02\x10\x02\x10\x02\x15\xa4\x02\x10\x02\x10\x02\x10!\x02\x10\x03'
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Event Loop) : Dispatch ZIGATE_PACKET_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Received response 0x8000: b'00000021'
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : RESPONSE 0x8000 - Status response : status:0, sequence:0, packet_type:33, error:b'', lqi:0
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Dispatch ZIGATE_RESPONSE_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : STATUS code to command 0x0021:RESPONSE 0x8000 - Status response : status:0, sequence:0, packet_type:33, error:b'', lqi:0
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : REQUEST : 0x0023 b'\x00'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Msg to send b'002300012200'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Encoded Msg to send b'010210230210021122021003'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0023
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Listen) : Raw packet received, b'\x01\x80\x02\x10\x02\x10\x02\x15\xa6\x02\x10\x02\x10\x02\x10#\x02\x10\x03'
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Event Loop) : Dispatch ZIGATE_PACKET_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Received response 0x8000: b'00000023'
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : RESPONSE 0x8000 - Status response : status:0, sequence:0, packet_type:35, error:b'', lqi:0
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Dispatch ZIGATE_RESPONSE_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : STATUS code to command 0x0023:RESPONSE 0x8000 - Status response : status:0, sequence:0, packet_type:35, error:b'', lqi:0
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Check network state
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : REQUEST : 0x0009
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Msg to send b'0009000009'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Encoded Msg to send b'010210021902100210021903'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0009
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Listen) : Raw packet received, b'\x02\x10\x02\x10\x02\x15\x8c\x02 \x06\xfe\x12\x068 \x83\xd0Z\x1f\xa1\x8d0(\xff'
[2019-10-02 19:30:17][WARNING][zigate](MainThread) : No response after command 0x0009 (1)
[2019-10-02 19:30:17][ERROR][zigate](MainThread) : Failed to get network state
[2019-10-02 19:30:17][DEBUG][zigate](MainThread) : Network is down, start it
[2019-10-02 19:30:17][DEBUG][zigate](MainThread) : REQUEST : 0x0024
[2019-10-02 19:30:17][DEBUG][zigate](MainThread) : Msg to send b'0024000024'
[2019-10-02 19:30:17][DEBUG][zigate](MainThread) : Encoded Msg to send b'01021024021002102403'
[2019-10-02 19:30:17][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0024
[2019-10-02 19:30:20][WARNING][zigate](MainThread) : No response after command 0x0024 (2)
[2019-10-02 19:30:20][DEBUG][zigate](MainThread) : Set Zigate normal mode (firmware >= 3.1a)
[2019-10-02 19:30:20][DEBUG][zigate](MainThread) : REQUEST : 0x0002 b'\x00'
[2019-10-02 19:30:20][DEBUG][zigate](MainThread) : Msg to send b'000200010300'
[2019-10-02 19:30:20][DEBUG][zigate](MainThread) : Encoded Msg to send b'0102100212021002110213021003'
[2019-10-02 19:30:20][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0002
[2019-10-02 19:30:23][WARNING][zigate](MainThread) : No response after command 0x0002 (3)
[2019-10-02 19:30:23][DEBUG][zigate](MainThread) : Set Zigate Time (firmware >= 3.0f)
[2019-10-02 19:30:23][DEBUG][zigate](MainThread) : REQUEST : 0x0016 b"%'\xb7O"
[2019-10-02 19:30:23][DEBUG][zigate](MainThread) : Msg to send b'00160004e82527b74f'
[2019-10-02 19:30:23][DEBUG][zigate](MainThread) : Encoded Msg to send b'0102101602100214e82527b74f03'
[2019-10-02 19:30:23][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0016
[2019-10-02 19:30:26][WARNING][zigate](MainThread) : No response after command 0x0016 (4)
[2019-10-02 19:30:26][DEBUG][zigate](MainThread) : REQUEST : 0x0015
[2019-10-02 19:30:26][DEBUG][zigate](MainThread) : Msg to send b'0015000015'
[2019-10-02 19:30:26][DEBUG][zigate](MainThread) : Encoded Msg to send b'01021015021002101503'
[2019-10-02 19:30:26][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0015
[2019-10-02 19:30:29][WARNING][zigate](MainThread) : No response after command 0x0015 (5)
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : Auto saving /var/www/html/plugins/zigate/core/class/../../resources/zigated/zigate.json
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : Saving persistent file
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : Acquire Lock to save persistent file
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : File already existing, make a backup before
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : Release Lock of persistent file
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : REQUEST : 0x0010
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : Msg to send b'0010000010'
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : Encoded Msg to send b'01021010021002101003'
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0010
[2019-10-02 19:30:32][WARNING][zigate](MainThread) : No response after command 0x0010 (6)
[2019-10-02 19:30:32][INFO][root](MainThread) : Firmware ZiGate : 3.1a
[2019-10-02 19:30:32][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'syncEqLogicWithZiGate'}
[2019-10-02 19:30:33][DEBUG] : Array ( [action] => syncEqLogicWithZiGate )
[2019-10-02 19:30:33][DEBUG] : Synchronisation des équipements entre le démon et jeedom
[2019-10-02 19:30:33][DEBUG] : callZiGate devices
[2019-10-02 19:30:33][DEBUG][root](Thread-4) : Message received in socket
[2019-10-02 19:30:33][DEBUG][root](Thread-4) : {'action': 'devices', 'args': ''}
[2019-10-02 19:30:33][DEBUG][root](Thread-4) : {'result': [], 'success': True}
[2019-10-02 19:30:33][DEBUG] : result callZiGate Array ( [result] => Array ( ) [success] => 1 )
[2019-10-02 19:30:33][DEBUG] : Désactivation des équipements manquants
[2019-10-02 19:30:33][DEBUG] : callZiGate get_missing
[2019-10-02 19:30:33][DEBUG][root](Thread-4) : Message received in socket
[2019-10-02 19:30:33][DEBUG][root](Thread-4) : {'action': 'get_missing', 'args': ''}
[2019-10-02 19:30:33][DEBUG][root](Thread-4) : {'result': [], 'success': True}
[2019-10-02 19:30:33][DEBUG] : result callZiGate Array ( [result] => Array ( ) [success] => 1 )
[2019-10-02 19:30:33][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:32:51][DEBUG] : callZiGate get_version_text
[2019-10-02 19:32:51][DEBUG][root](Thread-4) : Message received in socket
[2019-10-02 19:32:51][DEBUG][root](Thread-4) : {'action': 'get_version_text', 'args': ''}
[2019-10-02 19:32:51][DEBUG][root](Thread-4) : {'result': '3.1a', 'success': True}
[2019-10-02 19:32:51][DEBUG] : result callZiGate Array ( [result] => 3.1a [success] => 1 )
[2019-10-02 19:32:51][DEBUG] : callZiGate get_libversion
[2019-10-02 19:32:51][DEBUG][root](Thread-4) : Message received in socket
[2019-10-02 19:32:51][DEBUG][root](Thread-4) : {'action': 'get_libversion', 'args': ''}
[2019-10-02 19:32:51][DEBUG][root](Thread-4) : {'result': '0.32.2', 'success': True}
[2019-10-02 19:32:51][DEBUG] : result callZiGate Array ( [result] => 0.32.2 [success] => 1 )
[2019-10-02 19:33:12][DEBUG] : callZiGate permit_join
[2019-10-02 19:33:12][DEBUG][root](Thread-4) : Message received in socket
[2019-10-02 19:33:12][DEBUG][root](Thread-4) : {'action': 'permit_join', 'args': ''}
[2019-10-02 19:33:12][DEBUG][zigate](Thread-4) : REQUEST : 0x0049 FFFC1E00
[2019-10-02 19:33:12][DEBUG][zigate](Thread-4) : Msg to send b'0049000450fffc1e00'
[2019-10-02 19:33:12][DEBUG][zigate](Thread-4) : Encoded Msg to send b'010210490210021450fffc1e021003'
[2019-10-02 19:33:12][DEBUG][zigate](Thread-4) : Waiting for status message for command 0x0049
[2019-10-02 19:33:12][DEBUG][zigate](ZiGate-Listen) : Raw packet received, b'\x02\x10\x02\x10\x02\x15Q\x02\xf2'
[2019-10-02 19:33:15][WARNING][zigate](Thread-4) : No response after command 0x0049 (7)
[2019-10-02 19:33:15][DEBUG][root](Thread-4) : {'result': None, 'success': True}
[2019-10-02 19:33:15][DEBUG] : result callZiGate Array ( [result] => [success] => 1 )
[2019-10-02 19:33:33][ERROR][zigate](ZiGate-Listen) : OOPS connection lost, reconnect...
[2019-10-02 19:33:33][ERROR][zigate](ZiGate-Listen) : OOPS connection lost, reconnect...
[2019-10-02 19:33:33][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 1 sec...'}
[2019-10-02 19:33:33][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 1 sec...
[2019-10-02 19:33:33][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 1 sec...'}
[2019-10-02 19:33:33][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 1 sec... )
[2019-10-02 19:33:33][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:33:34][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 1 sec...'}
[2019-10-02 19:33:34][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 1 sec...
[2019-10-02 19:33:34][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 1 sec...'}
[2019-10-02 19:33:34][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 1 sec... )
[2019-10-02 19:33:34][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:33:35][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 2 sec...'}
[2019-10-02 19:33:35][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 2 sec...
[2019-10-02 19:33:35][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 2 sec...'}
[2019-10-02 19:33:35][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 2 sec... )
[2019-10-02 19:33:35][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:33:37][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 3 sec...'}
[2019-10-02 19:33:37][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 3 sec...
[2019-10-02 19:33:37][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 3 sec...'}
[2019-10-02 19:33:37][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 3 sec... )
[2019-10-02 19:33:38][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:33:40][INFO][zigate](ZiGate-Listen) : Searching ZiGate port
[2019-10-02 19:33:40][INFO][zigate](ZiGate-Listen) : ZiGate found at /dev/ttyAMA0
[2019-10-02 19:33:40][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 5 sec...'}
[2019-10-02 19:33:40][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 5 sec...
[2019-10-02 19:33:41][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 5 sec...'}
[2019-10-02 19:33:41][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 5 sec... )
[2019-10-02 19:33:41][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:33:45][INFO][zigate](ZiGate-Listen) : Searching ZiGate port
[2019-10-02 19:33:45][INFO][zigate](ZiGate-Listen) : ZiGate found at /dev/ttyAMA0
[2019-10-02 19:33:45][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 7 sec...'}
[2019-10-02 19:33:45][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 7 sec...
[2019-10-02 19:33:46][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 7 sec...'}
[2019-10-02 19:33:46][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 7 sec... )
[2019-10-02 19:33:46][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:33:52][INFO][zigate](ZiGate-Listen) : Searching ZiGate port
[2019-10-02 19:33:52][INFO][zigate](ZiGate-Listen) : ZiGate found at /dev/ttyAMA0
[2019-10-02 19:33:52][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 11 sec...'}
[2019-10-02 19:33:52][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 11 sec...
[2019-10-02 19:33:53][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 11 sec...'}
[2019-10-02 19:33:53][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 11 sec... )
[2019-10-02 19:33:53][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:34:03][INFO][zigate](ZiGate-Listen) : Searching ZiGate port
[2019-10-02 19:34:03][INFO][zigate](ZiGate-Listen) : ZiGate found at /dev/ttyAMA0
[2019-10-02 19:34:03][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 17 sec...'}
[2019-10-02 19:34:03][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 17 sec...
[2019-10-02 19:34:04][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 17 sec...'}
[2019-10-02 19:34:04][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 17 sec... )
[2019-10-02 19:34:04][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:34:20][INFO][zigate](ZiGate-Listen) : Searching ZiGate port
[2019-10-02 19:34:20][INFO][zigate](ZiGate-Listen) : ZiGate found at /dev/ttyAMA0
[2019-10-02 19:34:20][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_C

j'ai une nouvelle fois supprime la prise pour faire une nouvelle inclusion voila le log;

[2019-10-02 19:29:01][ERROR][zigate](ZiGate-Listen) : OOPS connection lost, reconnect...
[2019-10-02 19:29:00][ERROR][zigate](ZiGate-Listen) : OOPS connection lost, reconnect...
[2019-10-02 19:29:11][ERROR][zigate](MainThread) : Failed to acquire Lock to save persistent file
[2019-10-02 19:29:06][ERROR][zigate](MainThread) : Failed to acquire Lock to save persistent file
[2019-10-02 19:30:11][INFO] : Lancement démon zigate : /usr/bin/python3 /var/www/html/plugins/zigate/core/class/../../resources/zigated/zigated.py --device /dev/ttyAMA0 --gpio 1 --loglevel debug --apikey tPgF5jPEiCQb5XSiV3MfIZlcdT8WBPFI --pid /tmp/jeedom/zigate/daemon.pid --socket /tmp/jeedom/zigate/daemon.sock --callback http://127.0.0.1:80/plugins/zigate/core/php/jeeZiGate.php --sharedata 0
[2019-10-02 19:30:12][INFO][root](MainThread) : Start zigated
[2019-10-02 19:30:12][INFO][root](MainThread) : Log level : debug
[2019-10-02 19:30:12][INFO][root](MainThread) : Socket : /tmp/jeedom/zigate/daemon.sock
[2019-10-02 19:30:12][INFO][root](MainThread) : PID file : /tmp/jeedom/zigate/daemon.pid
[2019-10-02 19:30:12][INFO][root](MainThread) : Apikey : tPgF5jPEiCQb5XSiV3MfIZlcdT8WBPFI
[2019-10-02 19:30:12][INFO][root](MainThread) : Device : /dev/ttyAMA0
[2019-10-02 19:30:12][INFO][root](MainThread) : Callback : http://127.0.0.1:80/plugins/zigate/core/php/jeeZiGate.php
[2019-10-02 19:30:12][INFO][root](MainThread) : Python version : 3.7.3 (default, Apr 3 2019, 05:39:12)
[GCC 8.2.0]
[2019-10-02 19:30:12][INFO][root](MainThread) : zigate version : 0.32.2
[2019-10-02 19:30:12][INFO][root](MainThread) : Plugin Abeille détecté, vérification de l'état
[2019-10-02 19:30:12][INFO][root](MainThread) : Ok, le plugin Abeille ne semble pas en fonctionnement.
[2019-10-02 19:30:12][DEBUG][root](MainThread) : Writing PID 1703 to /tmp/jeedom/zigate/daemon.pid
[2019-10-02 19:30:12][DEBUG][root](MainThread) : Send to test to jeedom
[2019-10-02 19:30:12][DEBUG][root](MainThread) : Send to jeedom : {'action': 'test'}
[2019-10-02 19:30:12][DEBUG] : Array ( [action] => test )
[2019-10-02 19:30:12][DEBUG][root](MainThread) : Jeedom reply : {'success': True}
[2019-10-02 19:30:12][INFO][root](MainThread) : Démarrage ZiGate /dev/ttyAMA0
[2019-10-02 19:30:13][INFO] : Démon zigate lancé
/usr/local/lib/python3.7/dist-packages/zigate/core.py:2177: RuntimeWarning: This channel is already in use, continuing anyway. Use GPIO.setwarnings(False) to disable warnings.
GPIO.setup(27, GPIO.OUT) # GPIO2
/usr/local/lib/python3.7/dist-packages/zigate/core.py:2184: RuntimeWarning: This channel is already in use, continuing anyway. Use GPIO.setwarnings(False) to disable warnings.
GPIO.setup(17, GPIO.IN, pull_up_down=GPIO.PUD_DOWN) # GPIO0
[2019-10-02 19:30:13][DEBUG][zigate](MainThread) : Try loading persistent file
[2019-10-02 19:30:13][DEBUG][zigate](MainThread) : Trying to load /var/www/html/plugins/zigate/core/class/../../resources/zigated/zigate.json
[2019-10-02 19:30:13][DEBUG][zigate](MainThread) : Load success
[2019-10-02 19:30:13][DEBUG][zigate](MainThread) : REQUEST : 0x0010
[2019-10-02 19:30:13][DEBUG][zigate](MainThread) : Msg to send b'0010000010'
[2019-10-02 19:30:13][DEBUG][zigate](MainThread) : Encoded Msg to send b'01021010021002101003'
[2019-10-02 19:30:13][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0010
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Listen) : Raw packet received, b'\x01\x80\x02\x10\x02\x10\x02\x15\x95\x02\x10\x02\x10\x02\x10\x10\x02\x10\x03\x01\x80\x10\x02\x10\x02\x15\x8f\x02\x10\x02\x13\x02\x13\x1a\x02\x10\x03'
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Event Loop) : Dispatch ZIGATE_PACKET_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Received response 0x8000: b'00000010'
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Event Loop) : Dispatch ZIGATE_PACKET_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : RESPONSE 0x8000 - Status response : status:0, sequence:0, packet_type:16, error:b'', lqi:0
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Received response 0x8010: b'0003031a'
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Dispatch ZIGATE_RESPONSE_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : STATUS code to command 0x0010:RESPONSE 0x8000 - Status response : status:0, sequence:0, packet_type:16, error:b'', lqi:0
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : RESPONSE 0x8010 - Version list : major:3, installer:31a, lqi:0, version:3.1a
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Waiting for message 0x8010
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Dispatch ZIGATE_RESPONSE_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Stop waiting, got message 0x8010
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : REQUEST : 0x0021 b'\x03\x18\xc8\x00'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Msg to send b'00210004f60318c800'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Encoded Msg to send b'0102102102100214f6021318c8021003'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0021
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Listen) : Raw packet received, b'\x01\x80\x02\x10\x02\x10\x02\x15\xa4\x02\x10\x02\x10\x02\x10!\x02\x10\x03'
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Event Loop) : Dispatch ZIGATE_PACKET_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Received response 0x8000: b'00000021'
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : RESPONSE 0x8000 - Status response : status:0, sequence:0, packet_type:33, error:b'', lqi:0
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Dispatch ZIGATE_RESPONSE_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : STATUS code to command 0x0021:RESPONSE 0x8000 - Status response : status:0, sequence:0, packet_type:33, error:b'', lqi:0
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : REQUEST : 0x0023 b'\x00'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Msg to send b'002300012200'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Encoded Msg to send b'010210230210021122021003'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0023
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Listen) : Raw packet received, b'\x01\x80\x02\x10\x02\x10\x02\x15\xa6\x02\x10\x02\x10\x02\x10#\x02\x10\x03'
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Event Loop) : Dispatch ZIGATE_PACKET_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Received response 0x8000: b'00000023'
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : RESPONSE 0x8000 - Status response : status:0, sequence:0, packet_type:35, error:b'', lqi:0
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Decode data) : Dispatch ZIGATE_RESPONSE_RECEIVED
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : STATUS code to command 0x0023:RESPONSE 0x8000 - Status response : status:0, sequence:0, packet_type:35, error:b'', lqi:0
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Check network state
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : REQUEST : 0x0009
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Msg to send b'0009000009'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Encoded Msg to send b'010210021902100210021903'
[2019-10-02 19:30:14][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0009
[2019-10-02 19:30:14][DEBUG][zigate](ZiGate-Listen) : Raw packet received, b'\x02\x10\x02\x10\x02\x15\x8c\x02 \x06\xfe\x12\x068 \x83\xd0Z\x1f\xa1\x8d0(\xff'
[2019-10-02 19:30:17][WARNING][zigate](MainThread) : No response after command 0x0009 (1)
[2019-10-02 19:30:17][ERROR][zigate](MainThread) : Failed to get network state
[2019-10-02 19:30:17][DEBUG][zigate](MainThread) : Network is down, start it
[2019-10-02 19:30:17][DEBUG][zigate](MainThread) : REQUEST : 0x0024
[2019-10-02 19:30:17][DEBUG][zigate](MainThread) : Msg to send b'0024000024'
[2019-10-02 19:30:17][DEBUG][zigate](MainThread) : Encoded Msg to send b'01021024021002102403'
[2019-10-02 19:30:17][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0024
[2019-10-02 19:30:20][WARNING][zigate](MainThread) : No response after command 0x0024 (2)
[2019-10-02 19:30:20][DEBUG][zigate](MainThread) : Set Zigate normal mode (firmware >= 3.1a)
[2019-10-02 19:30:20][DEBUG][zigate](MainThread) : REQUEST : 0x0002 b'\x00'
[2019-10-02 19:30:20][DEBUG][zigate](MainThread) : Msg to send b'000200010300'
[2019-10-02 19:30:20][DEBUG][zigate](MainThread) : Encoded Msg to send b'0102100212021002110213021003'
[2019-10-02 19:30:20][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0002
[2019-10-02 19:30:23][WARNING][zigate](MainThread) : No response after command 0x0002 (3)
[2019-10-02 19:30:23][DEBUG][zigate](MainThread) : Set Zigate Time (firmware >= 3.0f)
[2019-10-02 19:30:23][DEBUG][zigate](MainThread) : REQUEST : 0x0016 b"%'\xb7O"
[2019-10-02 19:30:23][DEBUG][zigate](MainThread) : Msg to send b'00160004e82527b74f'
[2019-10-02 19:30:23][DEBUG][zigate](MainThread) : Encoded Msg to send b'0102101602100214e82527b74f03'
[2019-10-02 19:30:23][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0016
[2019-10-02 19:30:26][WARNING][zigate](MainThread) : No response after command 0x0016 (4)
[2019-10-02 19:30:26][DEBUG][zigate](MainThread) : REQUEST : 0x0015
[2019-10-02 19:30:26][DEBUG][zigate](MainThread) : Msg to send b'0015000015'
[2019-10-02 19:30:26][DEBUG][zigate](MainThread) : Encoded Msg to send b'01021015021002101503'
[2019-10-02 19:30:26][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0015
[2019-10-02 19:30:29][WARNING][zigate](MainThread) : No response after command 0x0015 (5)
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : Auto saving /var/www/html/plugins/zigate/core/class/../../resources/zigated/zigate.json
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : Saving persistent file
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : Acquire Lock to save persistent file
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : File already existing, make a backup before
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : Release Lock of persistent file
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : REQUEST : 0x0010
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : Msg to send b'0010000010'
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : Encoded Msg to send b'01021010021002101003'
[2019-10-02 19:30:29][DEBUG][zigate](MainThread) : Waiting for status message for command 0x0010
[2019-10-02 19:30:32][WARNING][zigate](MainThread) : No response after command 0x0010 (6)
[2019-10-02 19:30:32][INFO][root](MainThread) : Firmware ZiGate : 3.1a
[2019-10-02 19:30:32][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'syncEqLogicWithZiGate'}
[2019-10-02 19:30:33][DEBUG] : Array ( [action] => syncEqLogicWithZiGate )
[2019-10-02 19:30:33][DEBUG] : Synchronisation des équipements entre le démon et jeedom
[2019-10-02 19:30:33][DEBUG] : callZiGate devices
[2019-10-02 19:30:33][DEBUG][root](Thread-4) : Message received in socket
[2019-10-02 19:30:33][DEBUG][root](Thread-4) : {'action': 'devices', 'args': ''}
[2019-10-02 19:30:33][DEBUG][root](Thread-4) : {'result': [], 'success': True}
[2019-10-02 19:30:33][DEBUG] : result callZiGate Array ( [result] => Array ( ) [success] => 1 )
[2019-10-02 19:30:33][DEBUG] : Désactivation des équipements manquants
[2019-10-02 19:30:33][DEBUG] : callZiGate get_missing
[2019-10-02 19:30:33][DEBUG][root](Thread-4) : Message received in socket
[2019-10-02 19:30:33][DEBUG][root](Thread-4) : {'action': 'get_missing', 'args': ''}
[2019-10-02 19:30:33][DEBUG][root](Thread-4) : {'result': [], 'success': True}
[2019-10-02 19:30:33][DEBUG] : result callZiGate Array ( [result] => Array ( ) [success] => 1 )
[2019-10-02 19:30:33][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:32:51][DEBUG] : callZiGate get_version_text
[2019-10-02 19:32:51][DEBUG][root](Thread-4) : Message received in socket
[2019-10-02 19:32:51][DEBUG][root](Thread-4) : {'action': 'get_version_text', 'args': ''}
[2019-10-02 19:32:51][DEBUG][root](Thread-4) : {'result': '3.1a', 'success': True}
[2019-10-02 19:32:51][DEBUG] : result callZiGate Array ( [result] => 3.1a [success] => 1 )
[2019-10-02 19:32:51][DEBUG] : callZiGate get_libversion
[2019-10-02 19:32:51][DEBUG][root](Thread-4) : Message received in socket
[2019-10-02 19:32:51][DEBUG][root](Thread-4) : {'action': 'get_libversion', 'args': ''}
[2019-10-02 19:32:51][DEBUG][root](Thread-4) : {'result': '0.32.2', 'success': True}
[2019-10-02 19:32:51][DEBUG] : result callZiGate Array ( [result] => 0.32.2 [success] => 1 )
[2019-10-02 19:33:12][DEBUG] : callZiGate permit_join
[2019-10-02 19:33:12][DEBUG][root](Thread-4) : Message received in socket
[2019-10-02 19:33:12][DEBUG][root](Thread-4) : {'action': 'permit_join', 'args': ''}
[2019-10-02 19:33:12][DEBUG][zigate](Thread-4) : REQUEST : 0x0049 FFFC1E00
[2019-10-02 19:33:12][DEBUG][zigate](Thread-4) : Msg to send b'0049000450fffc1e00'
[2019-10-02 19:33:12][DEBUG][zigate](Thread-4) : Encoded Msg to send b'010210490210021450fffc1e021003'
[2019-10-02 19:33:12][DEBUG][zigate](Thread-4) : Waiting for status message for command 0x0049
[2019-10-02 19:33:12][DEBUG][zigate](ZiGate-Listen) : Raw packet received, b'\x02\x10\x02\x10\x02\x15Q\x02\xf2'
[2019-10-02 19:33:15][WARNING][zigate](Thread-4) : No response after command 0x0049 (7)
[2019-10-02 19:33:15][DEBUG][root](Thread-4) : {'result': None, 'success': True}
[2019-10-02 19:33:15][DEBUG] : result callZiGate Array ( [result] => [success] => 1 )
[2019-10-02 19:33:33][ERROR][zigate](ZiGate-Listen) : OOPS connection lost, reconnect...
[2019-10-02 19:33:33][ERROR][zigate](ZiGate-Listen) : OOPS connection lost, reconnect...
[2019-10-02 19:33:33][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 1 sec...'}
[2019-10-02 19:33:33][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 1 sec...
[2019-10-02 19:33:33][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 1 sec...'}
[2019-10-02 19:33:33][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 1 sec... )
[2019-10-02 19:33:33][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:33:34][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 1 sec...'}
[2019-10-02 19:33:34][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 1 sec...
[2019-10-02 19:33:34][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 1 sec...'}
[2019-10-02 19:33:34][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 1 sec... )
[2019-10-02 19:33:34][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:33:35][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 2 sec...'}
[2019-10-02 19:33:35][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 2 sec...
[2019-10-02 19:33:35][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 2 sec...'}
[2019-10-02 19:33:35][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 2 sec... )
[2019-10-02 19:33:35][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:33:37][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 3 sec...'}
[2019-10-02 19:33:37][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 3 sec...
[2019-10-02 19:33:37][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 3 sec...'}
[2019-10-02 19:33:37][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 3 sec... )
[2019-10-02 19:33:38][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:33:40][INFO][zigate](ZiGate-Listen) : Searching ZiGate port
[2019-10-02 19:33:40][INFO][zigate](ZiGate-Listen) : ZiGate found at /dev/ttyAMA0
[2019-10-02 19:33:40][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 5 sec...'}
[2019-10-02 19:33:40][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 5 sec...
[2019-10-02 19:33:41][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 5 sec...'}
[2019-10-02 19:33:41][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 5 sec... )
[2019-10-02 19:33:41][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:33:45][INFO][zigate](ZiGate-Listen) : Searching ZiGate port
[2019-10-02 19:33:45][INFO][zigate](ZiGate-Listen) : ZiGate found at /dev/ttyAMA0
[2019-10-02 19:33:45][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 7 sec...'}
[2019-10-02 19:33:45][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 7 sec...
[2019-10-02 19:33:46][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 7 sec...'}
[2019-10-02 19:33:46][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 7 sec... )
[2019-10-02 19:33:46][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:33:52][INFO][zigate](ZiGate-Listen) : Searching ZiGate port
[2019-10-02 19:33:52][INFO][zigate](ZiGate-Listen) : ZiGate found at /dev/ttyAMA0
[2019-10-02 19:33:52][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 11 sec...'}
[2019-10-02 19:33:52][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 11 sec...
[2019-10-02 19:33:53][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 11 sec...'}
[2019-10-02 19:33:53][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 11 sec... )
[2019-10-02 19:33:53][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:34:03][INFO][zigate](ZiGate-Listen) : Searching ZiGate port
[2019-10-02 19:34:03][INFO][zigate](ZiGate-Listen) : ZiGate found at /dev/ttyAMA0
[2019-10-02 19:34:03][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_CONNECT : {'message': 'Failed to connect, retry in 17 sec...'}
[2019-10-02 19:34:03][ERROR][zigate](ZiGate-Listen) : Failed to connect, retry in 17 sec...
[2019-10-02 19:34:04][DEBUG][root](Thread-1) : Send to jeedom : {'action': 'ZIGATE_FAILED_TO_CONNECT', 'message': 'Failed to connect, retry in 17 sec...'}
[2019-10-02 19:34:04][DEBUG] : Array ( [action] => ZIGATE_FAILED_TO_CONNECT [message] => Failed to connect, retry in 17 sec... )
[2019-10-02 19:34:04][DEBUG][root](Thread-1) : Jeedom reply : {'success': True}
[2019-10-02 19:34:20][INFO][zigate](ZiGate-Listen) : Searching ZiGate port
[2019-10-02 19:34:20][INFO][zigate](ZiGate-Listen) : ZiGate found at /dev/ttyAMA0
[2019-10-02 19:34:20][DEBUG][root](ZiGate-Listen) : External command ZIGATE_FAILED_TO_C

#8 · 3 octobre 2019, 14 h 19 min

Bonjour,

Il semblerait que vous ayez 2 plugins actifs : ZiGate et Abeille.

Vous devez faire un choix et supprimer l'autre ... Vous avez un conflit sur le port série.

Fred